X Series 4-Wheel Electric Forklift
%2Ff6e9ce05d786471a6263d9bfc20a1bbe.jpg&w=3840&q=75&dpl=dpl_4tYQeLTRkPaKpeeuRsChv3haeVLw)
The Hangcha X Series 4-Wheel Electric Forklift is a heavy-duty electric forklift offering a 4,000kg to 5,000kg capacity, a 7,000mm lift height, a high-frequency MOSFET controller, and anti-sliding ramp hold technology.
Formulated to transport heavy industrial loads and paper rolls inside manufacturing yards, this forklift focuses on high travel stability. Arranging the drive motor in parallel and placing the battery pack at the bottom of the frame increases the wheelbase to maximize cornering safety. The MOSFET integrated controller manages smooth lift hydraulics, complemented by regenerative braking and anti-sliding ramp hold.
Key Features
- Parallel Motor Layout: Increases the vehicle's wheelbase to improve lateral stability during turns.
- MOSFET Power Controller: High-frequency MOSFET controls for precise speed regulation and lift tuning.
- Anti-Sliding Protection: Prevents rollback hazards on incline ramps during start-and-stop cycles.
- Wide-View Overhead Guard: Optimized guard layout that maximizes vertical visibility for high-rack staging.
Why is anti-sliding ramp hold technology essential for medium capacity electric forklifts?
Stopping a 5-ton capacity forklift on steep factory ramps creates rollback risks. When operators release the brake pedal, gravity pulls the vehicle backward. Anti-sliding systems apply electric counter-torque to lock the drivetrain, holding the truck steady until acceleration is applied.
Technical Specifications
| Load Capacity | 4,000~4,990kg |
| Lift Height | 0~7,000mm |
| Drive Type | Battery (X Series Heavy Duty) |
Featuring Curtis controllers and anti-sliding ramp controls, this forklift is CE certified. Paper mill logistics planners note: "The X Series 5t electric forklift handles our heavy paper rolls with complete stability. The anti-sliding ramp hold gives our operators complete confidence on incline docks."
