HS Series Electric Crawler Scissor Lift
The Hangcha HS Series Electric Crawler Scissor Lift is a heavy-duty tracked aerial platform offering a 230kg to 450kg capacity, a 6,500mm to 13,800mm lift height, IP67 sealed drive motors, and a large-cell 8kWh LFP battery.
Formulated to execute heavy cladding installation and electrical line staging over unlevel soils, this tracked lift provides maximum ground traction. The fully sealed permanent magnet synchronous motor (PMSM) features an IP67 rating, protecting the traction drivetrain from mud slurry and water ingress. High-torque speed reducers improve slope climbing, supported by an 8kWh lithium iron phosphate battery pack.
Key Features
- IP67 Sealed Motors: Waterproof and dustproof PMSM motors designed to resist mud washouts.
- 8kWh Lithium Capacity: Large-cell LFP battery architecture supporting fast charging and long run times.
- High-Friction Tracks: Durable rubber crawler tracks designed to prevent slippage on sand or wet clay.
- Permanent Magnet Synchronous Drive: Energy-efficient drive motor yielding high travel speeds and climbing torque.
Why is an IP67 protection rating crucial for electric crawler lift motors?
Traversing construction washouts and standing rain puddles exposes drive motors to water damage. An IP67 rating verifies that the motor casing is completely sealed against dust and water immersion up to 1 meter, ensuring reliable operations in heavy outdoor storms.
Technical Specifications
| Load Capacity | 230~450kg |
| Lift Height | 6,500~13,800mm |
| Drive Type | Li-Ion (IP67 Crawler) |
Equipped with IP67 electric motors and high-capacity LFP batteries, this tracked scissor lift is CE certified. Infrastructure managers note: "The HS crawler lift's 13.8m height and IP67 motor sealing have allowed our crew to lay cable runs in muddy site conditions with zero motor downtime."
